nVent Hoffman A44PBCOL
Hoffman Angled Pedestal Column, Series: P1, Steel, Polyester Powder Painted, Gray, 41 in H x 4 in W x 4 in D
Supporting Information
- Columns can be mounted on either base, through the vertical column or directly to the enclosure|Columns have flanges at each end and a gasketed access plate|Screws, oil-resistant gaskets and box connector fitting are furnished with the column for joining an enclosure to the top|Bases have leveling screws and holes for bolting to the floor
- Pedestals enable many types of enclosures and boxes to be floor mounted
- Four columns and two bases are available
- Columns can be mounted on either base, through the vertical column or directly to the enclosure
- A cutout must be made in the enclosure if the wires are to come through the column
- Columns have flanges at each end and a gasketed access plate
- Screws, oil-resistant gaskets and box connector fitting are furnished with each column for joining an enclosure to the top of the column
- Columns are 14 ga steel with 10 ga flanges, 18 x 18 in (457 x 457 mm) base is 0.19 in (5 mm) steel and 24 x 24 in (610 x 610 mm) base is 1/4 in (6 mm) steel
- Both bases have leveling screws and holes for bolting to the floor
- Finish on bases and columns is ANSI 61 gray polyester powder coating over pretreated surfaces
- The user would normally remove the mounting brackets from the enclosure, if the enclosure is mounted on a pedestal
- Brand: nVent HoffmanColor: GrayDimensions: 41 in H x 4 in W x 4 in DFinish: Polyester Powder Painted