nVent Hoffman P2P208G
Hoffman PROLINE G2 Full Sub Panel, Conductive Rear Mount, Series: P40, 28.7 in Width, 75.1 in Height, For Use With: 2000 mm H x 800 mm W Frames, Steel, Galvanized
Supporting Information
- Accommodates five loading options: vertical front, vertical side, vertical rear, horizontal front (frame over subpanel), horizontal rear (subpanel lowered into frame)|High space efficiency ratio (HxW of subpanel)/(HxW of frame) of 84 percent|Mounting subpanel is securely fastened at the top and bottom of the enclosure; subpanels less than 1200mm wide include four sets of EZ-Load Glide Blocks, four BV-M6 fasteners (block to frame) and four M12 Hex Bolts (subpanel to block); Subpanels 1200mm an|Subpanels greater than 1000mm wide are 11 ga (3.0 mm) mild steel, while subpanels 100mm or narrower are 12 ga (2.5mm); conductive or white painted finish available|Subpanels can be mounted at any depth in 25-mm increments (front to back); accommodates back-to-back and fully recessed rear positions|Side-mount panels must be used for the sides of the enclosure; they can be installed on the interior sides of frames
- Accommodates five loading options: vertical front, vertical side, vertical rear, horizontal front (frame over subpanel), horizontal rear (subpanel lowered into frame)
- Large mounting subpanel, maximum internal space efficiency
- Mounting subpanel is securely fastened at the top and bottom of the enclosure
- Brand: nVent HoffmanFinish: GalvanizedMaterial: SteelSeries: P40Suitable For Use With: 2000 mm H x 800 mm W FramesType: Conductive Rear MountWidth: 28.7