Wire & Cable 13107806
Type SE and Style SER Service Entrance Cable. 600 Volt. Alumaflex Brand Aluminum Alloy (AA-8176) Conductors. Individual Conductors Rated XHHW Jacket and Inner Conductors are Sunlight Resistant.
Supporting Information
- The voltage rating is 600 V
- Individual conductors rated XHHW or THHN/THWN jacket and inner conductors are sunlight resistant
- Southwire® type SE cable is constructed with AlumaFlex® AA-8000 series aluminum alloy, compacted stranded conductors
- The conductors are covered with a sunlight resistant type XHHW-2 or type THHN/THWN-2-insulation
- A reinforcement tape is wrapped around the conductors for added strength and conformity
- A gray sunlight resistant polyvinyl chloride (PVC outer jacket covers the entire assembly
- Style SEU cable has two phase conductors surrounded by a concentric neutral while the SER style has two, three or four phase conductors and a bare neutral
- Allowable ampacities shown are for general use as specified by the national electrical code, 2011 Edition, section 310.15
- Allowable ampacities when terminated to equipment for circuits rated 100 A or less or marked for 14-1 AWG conductors at 60 deg C
- Allowable ampacities when terminated to equipment for circuits rated 100 A or marked for conductors larger than 1 AWG conductors at 75 deg C
- Allowable ampacities wet or dry locations, for ampacity derating purposes at 90 deg C
- Dwelling - for units, conductors shall be permitted at listed ampacities as 120/240 VAC, 3-wire, single phase services and feeders per NEC article 310.15
- 150 A at 60 deg C, 180 A at 75 deg C, 205 A at 90 deg c and 200 A at dwelling allowable ampacities
- Black and black with red stripe Southwire® style SER cable's phase conductors are identified by a colored stripe on the insulation
- Brand: Wire & CableAmperage Rating: 205Conductor size: 4/0Conductor Type: Stranded AluminumJacket Material: PVC