Dodge 071310
EF4B-IP-400R Dodge® 071310 315 Type E Imperial Non-Expansion Square Flange Mount Bearing, 4 in Dia Bore, 7-3/4 in L Bolt Center-to-Center, 10.96 in Dia Bolt Circle, 4-Bolt Flange Mount, 10-1/4 in OAL/Dia
Flange Mount Roller Bearing Units
7690006
071310
Dodge
$0.00
/ ea
- Bearing Material: Cast Iron
- Bolt Center-to-Center Length: 7-3/4
- Bolt Circle Diameter: 10.96
- Bore Diameter: 4
- Flange Mounting Type: 4-Bolt
- Load Capacity: 83000 lb Dynamic/104000 lb Static
- Locking Device: Tapered Adapter Sleeve
- Maximum Speed: 1530
- Overall Depth: 6.73
- Overall Height: 10-1/4
- Overall Length/Diameter: 10-1/4
- Series: 315
- Temperature Rating: -100 to 250
- Type: Type E Imperial Non-Expansion Square
Dodge® Flange Mount Bearing, Type E Imperial Non-Expansion Square, Series: 315, 4 in Bore, 7-3/4 in Bolt Center-to-Center Length, 10.96 in Diameter Bolt Circle, 4-Bolt Flange Mounting, 10-1/4 in Overall Length/Diameter, 6.73 in Overall Depth, 10-1/4 in Overall Height, Tapered Adapter Sleeve Locking Device, Cast Iron Bearing, 83000 lb Dynamic/104000 lb Static Load, 1530 rpm Maximum, -100 to 250 deg F
- Features
- Steel cage with guide rings offers precision roller guidance
- Adapter sleeve improves concentricity and reduces inherent vibration
- Ease in mounting and dismounting achieved through patented adapter system
- Push-pull adapter mount
- Grease limiting speeds 30% higher than setscrew mounts
- All housings are class 30 gray iron
- Shaft ready installation
- Superior holding power reduces the fretting corrosion caused by vibration
- Seal/land on OD of inner ring maintains full contact pressure even when misaligned
- Less shaft damage vs setscrew mounts
- Reduced vibration damage vs setscrew mounts