Dodge 050828
Dodge® 050828 205 Intermediate Duty Value Line Pillow Block Ball Bearing Unit, 1 in Dia Bore, 3.69 to 4.5 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 5-1/2 in OAL x 2.64 in OAH
Pillow Block Ball Bearing Units
7678058
050828
Dodge
$0.00
/ ea
- Base to Bore Centerline: 1.31
- Base Width: 1.4
- Bolt Center-to-Center Length: 3.69 to 4.5
- Bore Diameter: 1
- Bore Type: Round
- Expansion Type: Non-Expansion (Fixed)
- Finish: Powder Coated
- Load Capacity: 3146 lb Dynamic/1769 lb Static
- Locking Device: Set Screw
- Material: Steel
- Maximum Speed: 7500
- Mounting Type: Two-Bolt Base
- Overall Height: 2.64
- Overall Length: 5-1/2
- Overall Width: 1.34
- Seal Type: Single Lip
- Series: 205
- Type: Intermediate Duty Value Line
Dodge® Pillow Block Ball Bearing Unit, Intermediate Duty Value Line, Series: 205, 1 in Bore, 3.69 to 4.5 in Bolt Center-to-Center Length, 1.31 in Base to Bore Centerline, 5-1/2 in Overall Length, 1.34 in Overall Width, 2.64 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.4 in Base Width, Set Screw Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 3146 lb Dynamic/1769 lb Static Load, 7500 rpm Maximum, Steel, Powder Coated
- Features
- 65 deg set screw locking system
- Wide inner ring design
- Fiberglass reinforced nylon cage
- Grade 10 balls for quiet operation
- Proguard™ single lip seal
- No groove in housing for end cover
- Low backing height pillow block