ABB Installation Products 15PCJ1F2220
Elastimold 15PCJ1F2220 Style 1 Insulated Power Cable Joint With Single Piece Housing, 15 kV, 0.64 to 2.12 in Dia Cable, 2 AWG, 1 AWG Conductor, EPDM Rubber
Loadbreak Elbows
7299882
15PCJ1F2220
ABB Installation Products
$0.00
/ ea
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.640 inch to 0.820 inch. Copper Conductor. Conductor Size AWG Stranded #2/Solid #1.
- Features
- Power cable joints utilize permanently crimped connectors
- Units have been designed and tested per IEEE standard 404 to ensure system matched performance and ratings equal to the cable to which the splice will be installed
- Style 1 uses a single-piece housing that is sized to accommodate a specific range of cable ideally suited to straight splicing of the same or similar cable
- 4677 Cable joint IGCC
- Style 1 uses a single-piece housing that is sized to accommodate a specific range of cable - ideally suited to straight splicing of the same or similar cable
- Molded conductive shield provides a virtually indestructible ground shield for true deadfront construction
- Fully shielded, fully submersible molded rubber housing
- Molded conductive insert precludes subjecting entrapped air to electrical stress
- Grounding eye provides a convenient point to connect a ground wire to the molded conductive shield, placing the molded shield at ground potential
- Cable entrance engages the insulation shielding of the cable eliminating the need for taping
- Solid/stranded copper conductor