ABB Installation Products 15PCJ1H1260
Elastimold 15PCJ1H1260 Style 1 Insulated Power Cable Joint With Single Piece Housing, 15 kV, 0.64 to 2.12 in Dia Cable, 1/0 AWG, 2/0 AWG Conductor, EPDM Rubber
Wire Joints
7299900
15PCJ1H1260
ABB Installation Products
$0.00
/ ea
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.850 inch to 1.050 inch. Aluminum Conductor. Conductor Size AWG Stranded 3/0 or Solid 4/0.
- Features
- Power cable joints utilize permanently crimped connectors
- Units have been designed and tested per IEEE standard 404 to ensure system matched performance and ratings equal to the cable to which the splice will be installed
- Style 1 uses a single-piece housing that is sized to accommodate a specific range of cable ideally suited to straight splicing of the same or similar cable
- 4677 Cable joint IGCC
- Style 1 uses a single-piece housing that is sized to accommodate a specific range of cable - ideally suited to straight splicing of the same or similar cable
- Molded conductive shield provides a virtually indestructible ground shield for true deadfront construction
- Fully shielded, fully submersible molded rubber housing
- Molded conductive insert precludes subjecting entrapped air to electrical stress
- Grounding eye provides a convenient point to connect a ground wire to the molded conductive shield, placing the molded shield at ground potential
- Cable entrance engages the insulation shielding of the cable eliminating the need for taping
- Solid/stranded aluminum conductor