Eaton Crouse-Hinds EDS218

Crouse-Hinds FlexStation™ EDS218 1-Gang 2-Pole Dead End Factory Sealed Snap Switch Control Station With Switch, 120 to 277 VAC, 20 A, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating
Terminal Female Disconnects
7551193 EDS218
Eaton Crouse-Hinds
$0.00 / ea

Eaton Crouse-Hinds EDS218
Crouse-Hinds FlexStation™ Snap Switch Control Station, 1-Gang 2-Pole Dead End Factory Sealed, Series: EDS, 120 to 277 VAC, 20 A, 2 Pole, Front Operator, Handle Actuator, Thread Connection, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating, Surface Mounting, Feraloy® Iron Alloy, Electro-Galvanized/Aluminum Acrylic Painted, 5-7/8 in L x 3-1/2 in W x 2-11/16 in H Dimensions
QTY
Add to Wishlist
  • Features
  • Reduce installation problem
  • Eliminate external seals
  • Lower installation cost
  • Improve safety
  • Are used with general purpose snap and pushbutton type switches
  • Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
  • Mounting lugs and taper tapped hubs with integral bushing
  • Large machine screws for fastening covers to bodies
  • Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
  • Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
  • Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
  • On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
  • Dust ignitionproof, raintight
  • To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
  • In conjunction with magnetic starters or contactors for remote control of motors
  • For manual starting of small AC/DC motors
  • To provide manual starting and stopping and motor running protection (with heater)
  • 3/4 in hub