Eaton Crouse-Hinds EDS31274
EATON Crouse-Hinds FlexStation™ EDS31274 1-Gang Dead End Factory Sealed Heavy Duty Selector Switch Control Station, 600 VAC, 10 A, 8NO-4NC Contact, 3/7B/7C/7D/9E/9F/9G NEMA Rating
NEMA Pushbuttons - 30.5mm
7553754
EDS31274
Eaton Crouse-Hinds
$0.00
/ ea
Eaton Crouse-Hinds series EDS selector switch control station, With selector switch, With one 1" hub, Feraloy iron alloy, Three-position, four-circuit, 4, 1, Single-gang, 3, Dead end, 1"
- Features
- Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure, in conjunction with magnetic starters or contactors for remote control of motors
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- Explosionproof, Dust ignitionproof, raintight
- 1 in hub
- 3-position, 4-circuit