Eaton Crouse-Hinds EDSC215
Crouse-Hinds FlexStation™ EDSC215 1-Gang Factory Sealed Feed-Through Heavy Duty Pushbutton Control Station, 600 VAC, 1NC-1NO Contact, 1 Operators, 3/7B/7C/7D/9E/9F/9G NEMA Rating
NEMA Pushbuttons - 30.5mm
4234079
EDSC215
Eaton Crouse-Hinds
$0.00
/ ea
Eaton Crouse-Hinds series EDS pushbutton control station, With pushbuttons, Feraloy iron alloy, Two circuit, 2, Single-gang, 2, Through feed, 3/4"
- Features
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and all selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- When STOP is indicated, button is automatically red, when START is indicated, button is automatically green, otherwise, black buttons are standard
- 2-circuit universal
- 1 in hub
- Explosionproof, Dust ignitionproof and rain tight