Eaton Crouse-Hinds EFS21273
Crouse-Hinds FlexStation™ EFS21273 2-Circuit 3-Position 1-Gang Dead End Factory Sealed Heavy Duty Selector Switch Control Station, 600 VAC, 4NO-2NC Contact, 1 Operator, 3/7B/7C/7D/9E/9F/9G NEMA Rating
NEMA Pushbuttons - 30.5mm
6912494
EFS21273
Eaton Crouse-Hinds
$0.00
/ ea
Eaton Crouse-Hinds series EFS selector switch control station, With selector switch, With one 3/4" hub, Feraloy iron alloy, Single-gang, 3, Dead end, Three-position, two-circuit, 3/4", 600 Vac
- Features
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and all selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- When stop is indicated, button is automatically red, when start is indicated, button is automatically green, otherwise, black buttons are standard
- 3/4 in hub
- Explosionproof, dust ignitionproof, raintight