Wattstopper PW-302-I
WattStopper PW-302-I Dual Relay Wall Switch Occupancy Sensor, 120/277 VAC, Passive Infrared Sensor, 1050 sq-ft Coverage, 180 deg Viewing, Strap Mount
NEMA Transformers
7368687
PW-302-I
Wattstopper
$0.00
/ ea
The PW-302 Passive Infrared (PIR) Wall Switch Sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits, and a variety of features. (ivory)
- Features
- Time delay adjustments - 5 to 30 min at minimum, 3 minimum if no activity after 30 sec at walk through mode, 5 sec for 10 min with DIP switch setting at test mode
- High or low (dip switch) PIR adjustment
- 1000 W tungsten, ballast, E-ballast, LED, 1/4 hp load limit for relay 1 at 120 VAC, 1200 W ballast, E-ballast, LED, 1/4 hp load limit for relay 1 at 277 VAC, 800 W tungsten, ballast, E-ballast, LED, 1/6 hp load limit for relay 2 at 120 VAC, 1200 W ballast, E-ballast, LED, 1/6 hp load limit for relay 2 at 277 VAC
- Complies with 2011 NEC requirements
- Zero crossing for long relay life
- Vandal-resistant lens combines precise coverage with durability
- Selectable walk thorough mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s
- Test mode allows quick and easy adjustments
- Selectable audible alert for impending shutoff
- LED indicates occupancy detection
- In automatic mode, sensor returns automatically to auto On after lights are turned Off manually, ideal for presentations
- Optional light level sensing with simple setup
- Service mode allows sensor to operate as a service switch in the unlikely event of a failure
- Sensor coverage tested to NEMA guide publication WD 7 to 2000
- Compatible with decorator wallplates
- 2-relays for control of two separate lighting loads or circuits
- Tungsten ballast E-ballast load type
- Wall switch sensor turns lights off and on based on occupancy
- It contains two relays for controlling two independent lighting loads or circuits
- Optional neutral