nVent Hoffman VHDS26
Hoffman SYSPEND™ VHDS26 VM3 Type 4X Corrosion-Resistant Machine Top Mount VHDS Motion Arm, For Use With SYSPEND™ HMI Enclosures, 45 to 125 lb Load Capacity, 304 Stainless Steel
Operator Interface Systems
6992995
VHDS26
nVent Hoffman
$0.00
/ ea
Hoffman SYSPEND VHDS Motion Arm, Type 4X Corrosion-Resistant Machine Top Mount, Series: VM3, For Use With: SYSPEND HMI Enclosures, Specifications: 45 to 125 lb Load Capacity, 304 Stainless Steel, 10.18 in H x 30.65 in W x 4.86 in D Dimensions
- Features
- Two arm lengths are available with field adjustable counterbalances to support loads up to 125 lb
- No release handle is required to operate the arm
- Maintains NEMA type 4 and 12 and IEC® IP66 enclosure rating when properly installed per Hoffman instructions
- Corrosion-resistant stainless steel housing with provisions for water drainage from arm
- 26 in arm supports loads of 45 to 125 lb with 13 in of vertical height adjustment
- Field adjustable gas spring counterbalance allows the user to adjust lifting force by turning an adjustment mechanism under the arm
- Angle of gas springs is adjustable (not the pressure), allows lifting force to be increased or decreased at any time for changes in load
- Tension adjustment at front of the arm provides additional fine tuning of lifting force
- No locking enclosure handle required, enclosure stays in place after repositioning
- Easily interfaces with Hoffman HMI enclosures using a 60 x 60 mm enclosure mounting pattern
- 1-1/4 in internal cable pathway maintains type 4, 4X and 12 enclosure rating and protects wires and cables
- Gasketed mounting surfaces at both ends of arm maintain seal integrity
- Enclosure and arm can be swiveled 330 deg with swivel stops available in 30 deg increments